Label printing alignment in Fred Dispense

Fred Dispense

Overview

You can alter the alignment of a thermal label printout.

Steps

1. From the Setup menu, select System Configuration.

2. Select the Printer Type to match the model of your printer.

   For LP2844 printer we recommend Eltron Orion C4.

   If you have selected any of the Eltron printers for the label printer, a new Offsets button will be displayed.

3. Click Offsets.
   
   The Label Printer Fine Tuning screen appears displaying the default offsets for this printer type.
   

   Do not enter a number greater than 50 or less than -50. Try entering increments of 5 or 10 until the correct result is achieved.

   Option	Description
   Dispense Label X-Offset	Enter a user defined X Offset for the dispense label in 1/10mm. For example: If you enter 5 it will move the label 1/2mm to the right. If you enter -5 it will move the label 1/2mm to the left.
   Dispense Label Y-Offset	Enter a user defined Y Offset for the dispense label in 1/10mm. For example: If you enter 5 it will move the label 1/2mm down. If you enter -5 it will move the label 1/2mm up.
   Delivery Label	This includes the alignment for Pack, Delivery, Mailing, SN and Address labels.
   Delivery Label X-Offset	Enter a user defined X Offset for the delivery label in 1/10mm. For example: If you enter 5 it will move the label 1/2mm to the right. If you enter -5 it will move the label 1/2mm to the left.
   Delivery Label Y-Offset	Enter a user defined Y Offset for the delivery label in 1/10mm. For example: If you enter 5 it will move the label 1/2mm down and if you enter -5 it will move the label 1/2mm up.

Related links

Label Printing Alignment in Fred Dispense Online Help